Servo Control Universal Tensile Testing Machine

Specification

Test : Servo Controlled Eloctro Machanical Universal tensile Testing Machine.

Conforms to standards : Tensile test as per IS 1828, BS ; 1610

• IS 7809 ( part 3.sec-1), IS 1554 (part 1&2): 1988. 8783 ( all parts ) etc.
• Capacity : 100KN with 3 load cells
• Range : Wire 0.5 to 15 mm.

Technical parameter :

• Capacity :100Kn
• Vertical columns : Minimum 2 nos
• Movement : Servo Controlled Electro - mechanical (smmoth and jerk tree movement through ball scraw)
• Accuracy : plus minus 1% or better from 2% to 100% load cell capacity.
• Cross head speed : 0.5-500mn.min or better
• Load cell ; 100kn, 10kn and 1kn to be provided
• Load cell resolution : 1/40000 of load cell 

Essential accessoriess/ igs/ fixtures: 

Following assential accessories/Jigs/ fustures will besupplied with machine.

Extensometer for Rubber & plastic materials electronic extensometer of minimum gauge length 80mm, resolution 0.005mm & accuracy plus mains 1% - Qty.01 no.

Extensometer for Rubber & plastic materials electronic extensometer of minimum gauge length 50mm, resolution 0.001mm & accuracy plus mains 1% - Qty.01 no

Clamping jaws/ grips for tensile Test (UTS, Y.S/PS and % E)

Clamping jaes for gropping of wire of dia. 0.5mm to 5mm: 01 set 9 covering the mentioned soze of job.

Clamping jaw for gropping of round specimen of diamter 10- 20mm : 01 set (covering the mentioned size of job.)

Clamping jaws for gripping of flat specimen of thickness 0-20mm : 01 set (coverning the mentioned size of jab.)